Extron electronic PVS 204SA User Manual
Specifications — pvs 204sa
Specifications — PVS 204SA
1
Extron PVS 204SA Twisted Pair Switcher • Specifications
Video— RGB
Gain ................................................. Unity (as a system with Extron PVT Series wall plates and transmitters)
Crosstalk ......................................... -70 dB @ 5 MHz
Switching speed ............................ 1 ms (max.) from front panel, 1-2 s from remote panel
CMRR .............................................. -90 dB @ 100 Hz, -70 dB @ 10 MHz
Video input— RGB
Number/signal type ..................... 2 VGA-UXGA RGBHV, RGBS
Connectors ..................................... 2 pairs female RJ-45 (See the user's manual for pin configurations.)
Nominal level ................................ 0.7 Vp-p for RGB (as a system including Extron PVT Series wall plates and
transmitters)
Minimum/maximum levels ........ Analog: 0.3 V to 1.5 Vp-p with no offset (as a system including Extron PVT
Series wall plates and transmitters)
Impedance ...................................... 75 ohms (as a system including Extron PVT Series wall plates and
transmitters)
Horizontal frequency .................... 15 kHz to 145 kHz
Vertical frequency .......................... 30 Hz to 170 Hz
DC offset (max. allowable)........... 1.0 V
Video output— RGB
Number/signal type ..................... 1 VGA-UXGA RGBHV, RGBS (follows input type)
Connectors ..................................... (1) 15-pin HD female
Nominal level ................................ 0.7 Vp-p for RGB (as a system including Extron PVT Series wall plates and
transmitters)
Minimum/maximum levels ........ 0.3 V to 1.5 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... <-40 dB @ 5 MHz
DC offset ......................................... ±5 mV, max., with input at 0 offset
Video— composite video
Gain ................................................. Unity (as a system with Extron PVT Series wall plates and transmitters)
Differential phase error ................ 0.25° at 3.58 MHz and 4.43 MHz
Differential gain error ................... 0.15% at 3.58 MHz and 4.43 MHz
Switching speed ............................ 1 ms (max.) from front panel, 1-2 s from remote panel
CMRR .............................................. -90 dB @ 100 Hz, -70 dB @ 10 MHz
Video input— composite video
Number/signal type ..................... 2 composite video
Connectors ..................................... 2 female RJ-45 (Read the manual for pin configurations.)
Nominal level ................................ 1 Vp-p for composite video (including sync, as a system including Extron
PVT Series wall plates and transmitters)
Minimum/maximum levels ........ Analog: 0.4 V to 2.0 Vp-p with no offset
Impedance ...................................... 75 ohms
Return loss ...................................... <-40 dB @ 5 MHz
DC offset (max. allowable)........... 1.0 V
Video output— composite video
Number/signal type ..................... 1 composite video
Connectors ..................................... 1 RCA female
Nominal level ................................ 1 Vp-p for composite video (including sync, as a system including Extron
PVT Series wall plates and transmitters)
Minimum/maximum levels ........ 0.4 V to 2.0 Vp-p (follows input)
Impedance ...................................... 75 ohms
Return loss ...................................... -40 dB @ 5 MHz
DC offset ......................................... ±20.5 mV with input at 0 offset