Envision Peripherals G2016wa - Manual (Page 7)

6
CONTROLS AND CONNECTORS
CONNECTING CABLES
Connecting the D-Sub Cable: Connect one end of the 15-pin D-Sub cable
to the D-sub Signal input socket on back of the monitor and connect the
other end to the computer’s D-Sub port.
Connecting the Power Cord: Connect the power cord into your LCD
monitor’s power input socket, and then plug the other end into a 3-pin AC
power outlet.
Caution: If the AC outlet is not grounded (with three holes), install the proper
grounding adapter (not supplied).
Connecting the DVI Cable (optional) : Connect one end of the 24-pin DVI
cable to the DVI signal input socket on the back of the monitor and
connect the other end to the computer’s DVI port.
Connecting the Audio Cable: Plug audio cable between the computer
multi-media (or sound) card's audio output and monitor's audio input socket.
Figure 2 Connecting Cables
1. Power input socket
2 DVI Signal input socket
3 D-Sub Signal input socket
4 Audio input socket