EarthQuake Chipper/Shredder 1692210 - Manual (Page 10)

Page 10
GetEarthquake.com
1-800-345-6007
Initial Assembly
Figure 18. Installing the Chipper Cone
A. Metal Cone Assembly
B. 5/18-18 Flange Nut
Initial Assembly
Install Chipper Cone - All Models
1 . Position the chipper cone (A) over the three 5/16-18
threaded studs protruding from the engine plate, and
attach using three 5/16-18 flange nuts (B).
2. Rotate cone and cone base away from engine so cone
does not contact engine.
3. Tighten the flange nuts securely.
A
B