Timer program extension, Tv/vcr, 33 - en – Emerson EWC27T4 User Manual
Page 33: Set beginning hour, Set beginning minute, Set end hour, Set end minute, Set the tape speed, Finish setting the program, Set the timer
- 33 -
EN
1C29
To shift the time schedule of an automatic timer
recording.
1)Press the POWER button.
2)Repeat step [1] on page 32.
3)Press the RECORD button and select the desired
program using the Arrow button K or L.
4)Press the RECORD button again.
Each additional push will shift forward the
begin/end time for recording by 10 minutes. When
the recording is already in progress, each additional
push will shift forward the end time only. If you
want to cancel while setting, press the PAUSE but-
ton on the remote control. The recording time
returns to the original time.
NOTE: When you shift forward the time schedule
during recording, the recording speed will automati-
cally be set to the SLP mode.
5)Press the ENTER or RETURN button to exit the
setting menu. Then press the SETUP button on the
remote control to return to original mode.
TO CORRECT A PROGRAM
•
While setting a program; press the Arrow button
s
to go back one step and enter the correct num-
bers using the Arrow button K or L.
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] - [2] on page 32.
3)Press the Arrow button B (or press the Arrow
button s to go back one step) until the part you
want to correct begins flashing, then make the
changes pressing the Arrow button K or L.
4)Press the POWER button to set automatic timer
recording.
TO CANCEL AN AUTOMATIC TIMER
RECORDING
•
After setting a program;
1)Press the POWER button.
2)Repeat steps [1] ~ [2] on page 32 and select a
program you want to cancel.
3)Press the C.RESET button.
4)Press the SETUP button on the remote control to
return to TV mode.
•
While recording is in progress;
1)Press the POWER button.
2)Press the STOP/EJECT button on the
TV/VCR/DVD.
TV/VCR
5
Set beginning hour
Press the Arrow button K or L until
the desired hour appears.
(Example: “ 7, PM” for 7:30PM)
Then press the Arrow button B.
6
Set beginning minute
Press the Arrow button K or L until
the desired minute appears.
(Example: “30” for 7:30PM)
Then press the Arrow button B.
7
Set end hour
Press the Arrow button K or L until
the desired hour appears.
(Example: “8, PM” for 8:50PM)
Then press the Arrow button B.
8
Set end minute
Press the Arrow button K or L
until the desired minute appears.
(Example: “50” for 8:50PM)
Then press the Arrow button B.
9
Set the tape speed
Press the Arrow button K or L
until the desired tape speed
appears. (Example: SP)
10
Finish setting the program
Press the ENTER or RETURN button. The program
is now completed.
•
To set another program, repeat steps [2] to [10].
•
Press the SETUP button on the remote control to
return to original mode.
11
Set the timer
Press the POWER button to set automatic timer
recording. The RECORDING indicator lights up.
•
You must turn off the TV/VCR/DVD to activate
automatic timer recording.
If power is not turned off and you continue watch-
ing TV, “TIMER REC STANDBY” starts flashing
on the TV screen 2 minutes before the programmed
start time.
TIMER PROGRAM EXTENSION
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/04 SUN 7:12
P
M
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/04 SUN 7:30
P
M
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/04 SUN 7:30
P
M
8:30
P
M
- -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/04 SUN 7:30
P
M
8:50
P
M
- -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
– TIMER PROGRAMMING –
CH DATE
BEGIN END
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
B
61 7/04 SUN 7:30
P
M
8:50
P
M
SP
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -
- -
-/- - - - -
-:- -
-:- - - -