Elation Professional IMAGE PRO 300 - Manual (Page 3)

General Information
Unpacking:
Safety Instructions:
Thank you for your purchase of this product. Every product has been
thoroughly tested and carefully packed before delivery. Unpack the
shipping carton carefully, saving the carton and all packaging materials
for possible later use.
Check carefully for sure your product is not damaged and all accessories
not missing. If your product appears to be damaged or missing, please do
not use it and contact your authorized dealer immediately.
[ This product must be earthed.
[ Do not make any inflammable liquids, water or metal objects
enter this unit.
[ Very hot lamp. Disconnect the power and wait for at least 10
minutes before you can replace the lamp.
[ Make sure the fan and the air inlets are clean and not blocked by
anything before usung.
[ Do not operate this unit if the ambient temperature(Ta) exceeds
40 C(104 F).
[ Do not stare directly into the light, as may do harm to your eyes.
[ Keep all flammable meterials at least 1 meter away from this unit.
[ Never operate this unit when its cover is removed.
[ Keep this unit out of children.
[ Do not dismantle or modify the unit.
[ Unplug the fixture from the AC outlet and allow the fixture to cool
before any service.
1
Pack Accessory List:
!
300 Watt HTI 300 metal halide lamp
!
1.5 m 3-pin American Plug mains cable with female IEC plug
!
Support for lens and effects, standard
!
Standard lens (1:2.4 / 100 mm)
!
Two electrified guides
!
Two bakelite screws
!
User's guide