Echo PE-200 - Manual (Page 11)

P
OWER
E
DGER
O
PERATOR
'
S
M
ANUAL
11
5. Depress trigger, and check for smooth throttle operation:
IDLE POSITION: Rotor must rest against idle adjustment screw (F)
when throttle is released.
WOT POSITION: Rotor must stop against adjustment fixture (G)
when throttle trigger is fully depressed.
NOTE
Consult with your Echo Dealer for correct adjustment procedure.
WARNING DANGER
Cutting attachment must not move at idle. If attachment moves,
see Carburetor Adjustment section page 19.
F
G
H
I
J
FRONT HANDLE
Tools Required: Cross-Head Screwdriver
1. Loosely assemble front handle (H) and bracket (I) over collar (J) on
drive shaft.
2. Position front handle in comfortable operating position and tighten
screws.