Polaris 2011 Widetrak LX - Manual (Page 110)

106
TROUBLESHOOTING
Engine Troubleshooting
Unless you have experience and training in two-cycle engine repair, see
your dealer if technical problems arise.
Problem Probable Cause Solution
Erratic engine
operating RPM
during acceler-
ation or load
variations Drive clutch binding • Disassemble drive clutch to inspect shift
weights for wear and free operation.
SEE YOUR DEALER.
• Clean and polish stationary shaft hub.
Driven clutch
malfunction • Replace ramp buttons and rollers. SEE
YOUR DEALER.
• Inspect movable sheaves for excessive
bushing clearance and replace if neces-
sary. SEE YOUR DEALER.
Harsh drive
clutch engage-
ment Drive belt worn or too
narrow • Replace drive belt.
Excessive belt/sheave
clearance • SEE YOUR DEALER.
Drive belt turns
over Wrong belt for applica-
tion • Replace drive belt.
Engine mount broken
or loose • Inspect and adjust or replace. SEE
YOUR DEALER.
Snowmobile
fails to move Clutch jammed • Belt twisted, spring broken, weights
stuck, lubricated. SEE YOUR
DEALER.
Track jammed • Foreign object caught or rail slide
melted to track clips due to lack of
lubrication.
• Machine may be frozen to ground.
Track may be iced up.
Chaincase sprocket or
chain jammed or bro-
ken • Chain is loose or broken, chain tight-
ener is loose. SEE YOUR DEALER.