Driveshaft bearing, Throttle cable, Maintenance – Polaris 2011 600 IQ Shift User Manual
Page 88: Lubrication
84
MAINTENANCE
Lubrication
Driveshaft Bearing
Inject grease into the fitting on the
speedometer sensor housing until
grease purges from the seal on the
inside of the tunnel. This should
take approximately two pumps. Do
not use more than four pumps.
Throttle Cable
Lubricate the throttle cable lightly
with grease or oil. With the engine
off, turn the handlebars to the left
and lubricate liberally as shown.
+
+
This manual is related to the following products: