Maintenance, Lights – Polaris 2009 Trail RMK User Manual

Page 90

Text mode
Original mode

MAINTENANCE

Lights

NOTE: Avoid touching a halogen bulb with bare fingers. Oil from skin

leaves a residue, causing a hot spot that will shorten the life of

the lamp. If fingers do touch the bulb, clean it with an alcohol-

moistened towel.

Removing Halogen Bulbs

1. Pinch the ends of the spring (1)

together and lift until it releases

from the spring retainer.

2. Lift spring carefully around

wire harness (2) and flip to out-

side of housing.

3. With the wire harness attached

to the bulb (3), withdraw bulb

from housing.

4. Grasp bulb by metal base and

carefully separate bulb from

harness.

Installing Halogen Bulbs

1. Hold bulb by metal base and install into wire harness.
2. Insert bulb into housing.
3. Carefully flip spring back into housing placing it around wire har-

ness.

4. Squeeze spring together until it is over the spring retainer and

release.

5. Verify headlight aim.