Polaris 2008 Victory Vegas - Manual (Page 104)

99
MAINTENANCE
Rear Wheel
Alignment
8. When wheel is aligned and drive belt tension is correct, tighten the adjuster lock nut (screw-style), then tighten
the axle nut.
Torque: 65 ft-lbs (88 Nm)
9. Recheck drive belt tension and alignment to be sure it is correct after tightening the axle.
10. If alignment is incorrect, repeat steps 4-8.
11. Pump rear brake pedal several times to reset brake pad distance.
12. Carefully lower the motorcycle and safely support it on the sidestand.
Care should be taken to be sure the motorcycle will not tip or fall while elevated. Severe personal injury
or death may occur if the motorcycle tips or falls.
WARNING