Polaris 2014 ATV Sportsman 800 EFI - Manual (Page 48)

46
OPERATION
Pre-Ride Checklist
Failure to inspect and verify that the ATV is in safe operating condition
before operating increases the risk of an accident. Always inspect the
ATV before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/lever travel Ensure proper operation 29
90
Brake fluid Ensure proper level 30
Auxiliary brake Ensure proper operation 32
Front suspension Inspect, lubricate if necessary 81
Rear suspension Inspect, lubricate if necessary 81
Steering Ensure free operation -
Tires Inspect condition and pressure 95
Wheels/fasteners Inspect, ensure fastener tightness 95
96
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 33
82
Coolant level (if applicable) Ensure proper level 88
89
Coolant hoses (if applicable) Inspect for leaks -
Throttle Ensure proper operation 28
93
Indicator lights/switches Ensure operation 26
Engine stop switch Ensure proper operation 27
Air filter, pre-filter Inspect, clean 97
Air box sediment tube Drain deposits whenever visible -
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
27
99
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
103
Riding gear Wear approved helmet, goggles, and
protective clothing
8