Polaris 2006 ATV Phoenix 200 - Manual (Page 48)

45
OPERATION
Starting the Engine
6. Squeeze the left brake lever.
NOTE: The starter will not engage unless the rear brake is applied.
Always squeeze and hold the left brake lever before
attempting to start the engine.
7. Press the start button.
8. Activate the starter for a maximum of five seconds, releasing the
button when the engine starts. If it doesn’t start, release the starter,
wait five seconds, then activate for another five seconds. Repeat
until the engine starts.
9. If the engine slows or stops, position the choke lever half way to
allow proper engine warm up. Vary the RPM slightly with the
throttle to aid in warm up.
10. When the engine idles smoothly, push the choke lever all the way
to the right.
CAUTION
Operating the vehicle immediately after starting could cause
engine damage. Allow the engine to warm up for several minutes
before operating the vehicle.