General – Grass Valley XtenDD v.4.5.6 User Manual
Page 5
Supplement 2
XtenDD Production Switcher
1
Operating Instruction
1.
GENERAL
The new feature “Frame Store/Synchronizer” is an option for the XtenDD (SD)
production switcher.
This feature is realised with the 3 Channel Frame Store/Synchronizer modules
RY 3445. The Storage capacity per module is 400 Frames. Maximum two modules
can be plugged in on the RY 3442 Input Processor board for a total capacity of 800
frames in six channels.
1.1
REQUIREMENTS
In order to use the new feature the following requirements are essential:
D
Input Processor RY 3442 required.
Note: Not possible with RY 3441 Input Processor board!
D
One or two plug--in boards Frame Store RY 3445 are available on Input
Processor RY 3442
D
Operating software V456 or higher with Controller Board RY 3156 or
operating software V656 or higher with Controller Board RY 3490.
D
License keys installed.
1.2
ORDER NUMBERS
D
RY3445 Frame Stores/Synchronizers
000212344510
There are three channels onboard. They can be used as frame synchronizers
or as clip stores with a capability of 100 frames. It is possible to install two bo-
ards RY 3445 in each XtenDD. The modules are plug--in modules for the Input
Processor RY 3442.
D
LK 0170 Software licenses for RY3445
000157410170
Channels 1--3. Initial order only!
D
LK 0171 Software licenses for RY3445
000157410171
Channels 4--6. Initial order only!
D
LK 0172 Software licenses for RY 3445
000157410172
Channels 1--3. Later order only!
D
LK 0173 Software licenses for RY 3445
000157410173
Channels 4--6. Later order only!