Grass Valley TTN-BDS-1616RC - Manual (Page 19)

BDS-1616RC Rev. 2
11
5 15 5 15
Serial Digital Video 4 layer
SDV layer 1 Input SDV layer 1 Output
1 1 1 1
2 2 2 2
3 3 3 3
4 4 4 4
SDV layer 2 Input SDV layer 2 Output
1 5 1 5
2 6 2 6
3 7 3 8
4 8 4 8
SDV layer 3 Input SDV layer 3 Output
1 9 1 9
2 10
2 10
3 11 3 11
4 12 4 12
SDV layer 4 Input
SDV layer 4 Output
1 13
1 13
2 14 2 14
3 15 3 15
4 16 4 16
5.3 Vertical interval trigger
The BDS-1616RC router provides vertical interval switching. If vertical interval switching is desired you
have to connect an analogue VIT reference signal to the VIT input.
Switch 7 on the configuration switch enables or disables the VIT sensing on the VIT input. If VIT
switching is enabled but a proper signal is missing, the router will automatically switch without VIT.
The VIT can be switched according to the following pattern:
- means switch down
* means switch up
Switch
7 VIT
- disabled
* enabled
Default is VIT enabled.