Grass Valley TTN-BES-0808CP/75 - Manual (Page 12)

BES-0808CP/75 Rev. 2
4
4.3 Pin-out and cable type
4.3.1 RJ45
connectors
On some Triton devices, the NCB cable can be connected to RJ-45 connectors. The following pin-out is
used:
Pin 1 = Not Connected
Pin 2 = Not Connected
Pin 3 = Not Connected
Pin 4 = data
Pin 5 = data
Pin 6 = Not Connected
Pin 7 = Not Connected
Pin 8 = Not Connected
4.3.2 5-pin DIN connectors
However, the pin-out of most Network Control Bus ports, including that of the BES-0808CP/75 follows
the standard MIDI specification. A 1:1 cable with 5pin DIN connector is used. The following pin-out is
used:
Pin 1 = Not Connected
Pin 2 = shield
Pin 3 = Not Connected
Pin 4 = data
Pin 5 = data
The standard MIDI specification recommends the use of shielded twisted pair cable types for
interconnection between the units.