Grass Valley TTN-BTS-3232/140 - Manual (Page 16)

BTS-3232/140 Rev. 1
8
5.4 Power up mode
Switch 8 on the configuration switch SW A defines the power up mode. The BTS-3232/140 router
provides two modes for powering up the system.
Mode 1 switches all outputs to input 1.
Mode 2 switches all outputs according to the buffered information in the routers processor system.
The power up reset can be switched according to the following pattern:
- means switch down
* means switch up
Switch
8 Power Up Reset
- Mode
2
* Mode 1
Default is Mode 2.
6 Connecting signals to the BTS-3232/140
The BTS-3232/140 router offers standard 75 ohms BNC connectors for signal in- and outputs. All inputs
are terminated with 75 ohms.