Grass Valley TTN-BRS-3232 - Manual (Page 17)

BRS-3232 Rev. 1
9
When using the "Source-oriented" setup, the output buttons of a control panel will choose which Source is
the controlling device, and the input buttons will choose which Destination is to be controlled.
The latter approach makes it easier to use a single-bus panel to select one-of-several machines to control
from a single location.
The router orientation can be switched according to the following pattern:
- means switch down
* means switch up
Switch 6 Router Orientation
- Destination-oriented
* Source-oriented
Default is “Destination-oriented" setup.
5.3. Control mode
The BRS-3232 router can be assigned to either the video layer or the audio layer of a matrix system. With
switch 7 on the configuration switch you can set BRS-3232 to be controlled as either video or as audio.
- means switch down
* means switch up
Switch 7 Mode
- Controlled as audio
* Controlled as video
Default mode is controlled as audio.