Grass Valley ASD-272p User Manual

Page 10

Text mode
Original mode

ASD-272p

If switching from an NTSC source to a PAL-M source
which are both synchronized, the picoLink units may
interpret the PAL-M source as an NTSC source. If so,
the unit will not switch to PAL-M. In order to recover
from this problem, disconnect the source from the input
BNC and reinstall it.

4.2 Status LED

The bi-colored status LED, located next to the S-video
input cable, is provided to identify any input errors. The
following lists the possible situations.

Green:

Indicates the ASD-272p is powered and has
detected a valid S-video signal.

Red:

Indicates an error with the input signal has
been detected or simply, there is no input
signal installed.