Electrolux Microwave Oven TINSLB003MRR0 - Manual (Page 25)

E
25
More or less time adjustment
Should you discover that you like any of the Sensor
Modes, Auto Cook, Quick Settings or Defrost slightly
more done, press the
power level pad once after
pressing your choice of pads or before pressing
START pad. The display will show MORE.
Should you discover that you like any of the Sensor
Modes, Auto Cooks, Quick Settings or Defrost
slightly less done, press the
power level pad twice
after pressing your choice of pads or before pressing
START pad. The display will show LESS.
Quick Start
quick start is a short-cut method to set time for 1-6
minutes at power level 10.
• Suppose you want to heat a cup of soup for
two minutes.
Procedure
Step Press
Press number 2 pad.
2
The oven will start immediately and will signal then
turn off automatically when finished.
Add 30 Seconds
add 30 seconds provides a convenient way to
extend cooking time by 30 seconds while the oven
timer is counting down. It will add 30 seconds to the
time shown each time the pad is pressed.
This pad may also be used as a quick start for
30 seconds of cooking. No need to press START,
the oven will start immediately.
Help
Each setting has a cooking hint. If you wish to
check, press
user pref whenever HELP is lighted
in the Interactive Display for these and other manual
operation hints.
Multiple sequence cooking
Your oven can be programmed for up to 4 automatic
cooking sequences, switching from one power level
setting to another automatically.
Sometimes cooking directions tell you to start on
one power level and then change to a different power
level. Your oven can do this automatically.
• Suppose you want to cook roast beef for
5 minutes at 100% and then continue to cook
for 30 minutes at 50%.
Procedure
Step Press
1. Enter cooking time.
5 0 0
2. Press power level pad
once for 100% power.
power
level x 1
3. Enter second cooking
time.
3 0
0 0
4. Press power level pad
6 times for 50% power.
power
level x 6
5. Press START pad. START
NOTE
If 100% is selected as the final sequence, it is
not necessary to press the
power level pad.
Convenient Features
TINSLB003.indb 25 12/11/08 9:30:43 AM