Electrolux EHD 72100-X - Manual (Page 17)

17
Safety cut-out
Cooking surface
• If after switching on the cooking surface, a heat setting is not set for a
cooking zone within approx. 10 seconds, the cooking surface automati-
cally switches itself off.
• If one or more sensor fields are covered for longer than approx. 10 sec-
onds, e.g. by a pan placed upon it, a signal sounds and the cooking sur-
face switches off automatically.
• If all cooking zones are switched off, the cooking surface automatically
switches itself off after approx. 10 seconds.
Control panel
3
Moisture (e.g. a wet cloth) or liquid boiling over onto the control panel imme-
diately switches all cooking zones off.
Induction cooking zones
• In the case of overheating (e.g. when a saucepan boils dry) the cooking
zone automatically switches itself off. is displayed. Before being used
again, the cooking zone must be set to
0
and cooled down.
• If cookware that is not suitable is used, lights up in the display and af-
ter 2 minutes the indicator for the cooking zone switches itself off.
• If one of the cooking zones is not switched off after a certain time, or if the
heat setting is not modified, the relevant cooking zone switches off auto-
matically. is displayed. Before being used again, the cooking zone must
be set to 0.
Heat setting Switches off after
v, 1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours