beautypg.com

Operating instructions – Euro-Pro SC926H User Manual

Page 8

background image

OPERATING INSTRUCTIONS

OPERATING INSTRUCTIONS

Using Your Steam Cleaner with
Steam Pocket

1. Connect one of the extension

tubes to the hand grip on the flexible

steam hose. To attach the extension

tubes one onto the other or onto the

hand grip, press the locking button

ensuring that it fits into the hole.

(Fig. 4, Fig. 5) To disconnect, repeat

the operation by pressing the locking

button and pulling the two sections

apart.

NOTE:

Fit the steam pocket frame with

the angle adapter onto the

extension tube.

6

5. Insert the electrical power cord into

the wall outlet. Heating time is

approximately 18 minutes with cold

water. Filling the steam generator

with hot water will shorten the heat up

time.

Fig. 4

4. Bring the velcro strips that are on the

back side of the steam pocket towel

over the steam pocket frame and

attach to the inside of the front side of

the steam pocket towel. (Fig. 8)

2. To attach the steam pocket towel to

the steam pocket frame, slide the

steam pocket towel over the steam

pocket frame. (Fig. 6)

3. Bring the towel all the way to the

top of the steam pocket frame.

(Fig. 7)

WARNING:

Always insure the

unit is “UNPLUGGED” from the

wall receptacle prior to attaching or

removing accessories.

Fig. 6

Fig. 7

Fig. 8

Step 8: Connect desired attachments

onto the flexible steam hose.

Step 9: Plug the unit into a standard (120

volt, grounded) wall receptacle.

Allow approximately 18 minutes

for vapor to reach its working

temperature and pressure. The

green ready light will illuminate

when the unit is ready for use.

Always point nozzle outlet in a

safe direction.

NOTE: When the steam cleaner has run

out of water, steam output will

cease.

Care & Maintenance of the Steam
Pocket Towel

Due to the unique cleaning ability of this

cloth, proper care of your micro fiber towel

is required to ensure long life and

continued cleaning ability.

• The first thing you should do when

you get a new micro fiber towel is to

wash and dry it. During the

manufacturing process the fabric has a

tendency to become flat as it picks up

contaminants from the air and

machinery. There will also be a number

of loose threads that, while they cause

no harm, can be annoying the first time

you use the towel.

• To clean the towel, simply wash it in your

washing machine using the warm water

setting.

• Always wash your towels separately

from other fabrics. They have a tendency

to pick up lint and other particles from

other fabrics and the next time you use

your towel, this lint will transfer to the

surface being cleaned.

ONLY USE LIQUID DETERGENTS,

never use dry detergents as many times

the granules do not fully dissolve and

become trapped in the towel. This can

scratch the surface that you are

cleaning.

NEVER USE BLEACH OR FABRIC

SOFTENERS! Bleach will damage the

micro fiber fabric and fabric softeners

deposit a coating on the micro fiber

fabric what will not allow the cloth to

clean efficiently.

• Air dry the towel. Do not put in a clothes

dryer as high heat will cause the towel to

shrink and the micro fibers to break

down.

• If you wash your towel on a regular basis

and don’t let them get too dirty, they will

last much longer. As with any fabric, dirt

particles, grease and other contaminants

can cause the fibers to break down,

therefore regular cleaning will help

preserve your micro fiber towels.

• As you use the micro fiber towel, you will

notice that sometimes a thread will

loosen or pull out. This is normal and

you should NEVER PULL AT THE

LOOSE THREAD! Pulling the thread can

cause the weave to come undone.

Instead, simply trim the thread with a

pair of sharp scissors.

Concentrator

Attach the concentrator to the handgrip

or to the extension tubes.

Then attach the bristle

brushes to the

concentrator.
Nylon Detail Brush (x2)

It is best for cleaning grout in-between

the tiles, ceramic and marble.

To use: Attach the nylon

detail brush on to the end

of the concentrator, which

then may be used directly

on the hand grip or with extension

tubes.
Extended Concentrator

Use the extended concentrator

to clean under toilet rims

or hard to reach places.

To use: Attach the extended

concentrator onto the handgrip or the

extension tubes.

7

Dual Edge Glass & Tile Squeegee

This attachment is very useful for

cleaning windows, plastic material,

ceramic, tiled or marble surfaces.

To use: Connect the tile

squeegee to the hand

grip or use with extension

tube for hard to reach

surfaces. Apply steam

abundantly, rub with the soft spongy

edge, then remove excess water and

dirt with the glass wiping edge.

IMPORTANT:

When cleaning

windows, always avoid any sudden

changes in temperature to prevent glass

breakage or cracks.

Using the Variable Steam Feature

Your steam cleaner has a variable steam

feature that allows you to adjust the steam

flow to the job that you are doing. For

example, set the variable steam at lower

settings when using the window squeegee

and at higher settings when cleaning grout

seams. The variable

steam control is

located on the

handgrip. (Fig. 3)

To increase the

steam flow, turn

the knob counter

clockwise and to

decrease,

turn it

clockwise.

Fig. 3

Attaching the Accessories to the

Handgrip

Fig. 5