Grass Valley Krystal Multi-Channel - Manual (Page 6)

4 Krystal Multi-Channel Upgrade
Figure 1. Video Processor Hardware ID
System Power Up
Power up the components of your system in the following order:
1. All Video Processor frames
2. System Controller frame (wait 45 seconds for initialization)
3. All Control Panels
Configuration
You need to install each new channel (in software) so the system recognizes
the available hardware.
1. Acquire an Effect Manager.
2. Install the physical channels: System Setup \ SYSTEM CONFIG > \ OK \
CHANNEL CONFIG > . Select TRUE for all the channels present. You must
exit from the menu to save this change to NV RAM. Press the Exit
button.
3. Make any other configuration changes required for your system, then
save the configuration files to NV RAM and to floppy disk. Refer to the
latest Krystal Software Release notes for specific procedures.
POWER DC
0
Hardware ID
0868_01