Grass Valley Kayenne K-Frame Installation Planning Guide Dec 03 2013 - Manual (Page 14)

10 KAYENNE K-FRAME — Installation Planning Guide
Section 1 — Introduction
Multiple Suite Kayenne Panel System
A K-Frame system can be subdivided into two suites, if desired, each of
which can have two control surfaces (Surface A and Surface B). Each
surface has it's own set of Panel Preferences for configuration of the control
panel behavior and independent macro systems to allow for independent
building and running of macros by each operator at the control surface.
Hardware resources in the Video Processor Frame can be assigned to an
individual suite during configuration, essentially creating two separate
switchers sharing one frame (
Figure 11 ).
Figure 11. Kayenne Multi-Suite Standard Frame Example
8875_20
Suite 1
Menu on PC
KSP 1-ME
Soft Panel Option
Suite 2
4-ME 35 Kayenne Control Panel
Menu Panel
Panel Control Unit (PCU)
Standard 13-RU
K-Frame
Menu Panel
Panel Control Unit (PCU)
2-ME 25 Kayenne Control Panel
(Customer Supplied PC)
(Customer Supplied PC)