Grass Valley K2 TX/MAM Database Protocol Manual v.2.2 - Manual (Page 22)

TX/MAM Database Protocol Manual - document version: 2.2 – Page 22
8.2 Adding a field update for an int64 (= long long) database field
int cob_fieldlist_set_long( char *field, long long value, int data_type );
Parameters
Value Description
char *field The field to set, e.g. "id_category".
long long value The new value, e.g. 12.
int data_type The origin of the data, e.g. ORIGINAL_DATA.
Result
The result of the function is an integer that can have following values:
Value Description
0 Success, the field has been added.
-1 Failure, the field could not be added.
Example
This example sets the id_category field to 345 for asset_element record with id == 1035:
cob_fieldlist_clear();
cob_fieldlist_set_long( "id_category", 345, ORIGINAL_DATA );
if ( cob_adjust_field_values("asset_element", 1035) != 0 ){
/* Log error */
}