Grass Valley K2 TimeDelay v.2.1 - Manual (Page 13)

February 2007 K2 TimeDelay User Manual 13
Starting a new session manually
not capable of recording, TimeDelay does not display as an option.)
3. The K2 TimeDelay application starts. In the Settings dialog box, select the play
channel or channels for this TimeDelay session.
4. Specify the playback start time either in terms of delay or give an exact start time.
5. (Optional) Set up the AutoStart or Buffer. For more information, see “K2
TimeDelay settings” on page 10 .
6. Click OK . The settings do not take affect until you click OK .
NOTE: If any of the selected play channels are currently in use, no confirmation
message box appears before TimeDelay commandeers the channel.
Starting a new session manually
If you are already in the K2 TimeDelay application, you can start a new session
manually. To start a new session, do the following: