Grass Valley K2 Summit 3G Client Field Kit Upgrade Instructions v.8.x - Manual (Page 6)

3. Access the rear panel and remove as illustrated.
Slide out 2
Loosen
thumbscrews 1
NOTE: With a firm grip on the metal (EMI) bracket, ensure the board is level and parallel
to the card guides to avoid damage to the components on the edge opposite the rear panel.
CAUTION: Improper handling can damage components on the board. Do not allow the
board to come in contact with the chassis sheet metal during removal or installation. The
components on the edge opposite the rear panel are the most susceptible to damage.
4. Install codec option card as shown.
Install phillips head screws 3
Orient the codec module
with the card connectors
facing up 1
Position card
and engage card
connectors 2
6 K2 Summit 3G Field Kit Upgrade Instructions 31 January 2012
Upgrade instructions