Eagle Electronics CUDA 240I S - Manual (Page 7)

7
To activate NMEA Output:
From the Communication Ports menu, press
↓ to highlight NMEA
Output. Press ENT to check (turn on) or uncheck (turn off) the NMEA
Output checkbox.
To exit the Communication Ports menu, press EXIT | EXIT | EXIT .
Configure NMEA
Once in the Communication Ports menu, you can configure the unit to
use specific NMEA sentences. (The default setting has all NMEA
sentences turned on.) Press
↓ to
C
ONFIGURE
NMEA | ENT .
NMEA Sentences selection menu.
A menu appears showing the prefixes of the available NMEA sentences.
A check mark next to a prefix means the prefix is in use. Use
↑ ↓ → ←
to select a prefix, then press ENT to turn off the prefix. (Press ENT again
to check the box and turn a prefix on.)
NOTE:
The names of the NMEA sentences are abbreviated in this menu.
These are the functions of the various selectable prefixes:
•
GLL transmits latitude and longitude of present position, time of
position fix, and status.