Grass Valley iControlEdge v.1.20 - Manual (Page 44)

40
iControl Edge Web Monitoring 2
Disabling Alarms
Perform either of these procedures to change the operational mode of an alarm to either offline or in
maintenance. You can do this either directly, from any alarm status icon on the Web monitoring page, or in
the Alarm Browser.
Disabling an Alarm from an Alarm Icon
To disable an alarm directly from an alarm icon:
• Right-click the alarm status icon of the alarm you wish to disable, point to Operational mode on the
shortcut menu, and then click either Offline or In maintenance:
Note: Refer to “Configuring Allégro systems” in the iControl Edge Installation & Setup Guide for
details on the appropriate settings. For more information click User manual at the bottom of the
page’s navigation pane.
Note: You can perform this procedure using alarm status icons anywhere in the iControl
EdgeWeb monitoring page, including the Multi-Channel Monitoring area, the Channel Selector,
and the Detailed Channel Analysis area.
Allégro documentation