Grass Valley AMX-1881 - Manual (Page 6)

AMX-1881 HD/SD 8 AES Embedder
Guide to Installation and Operation
Page 6 of 19 AMX-1881
** Press Select pushbutton to activate selection.
[ ] list of available parameter values.
Underlined values in the parameter value lists are the factory default values, and will be applied when factory default-restore is selected.
[ NONE, GPI ]
● ●
ALARM REPORT [ NONE, GPI ]
[ NONE, GPI ]
ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
[ NONE, GPI ]
NO AES8 ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
● ●
NO AES5 ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
ALARM REPORT
[ GREEN, YELLOW, RED, FLASH RED ]
ALARM REPORT [ NONE, GPI ]
●
ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
ALARM REPORT [ NONE, GPI ]
ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
CONFIG ALARM** ALARM LEVEL
NO AES4
ALARM REPORT
ALARM REPORT
ALARM LEVEL
FACTORY DEFAULT** [RESTORE]
NO SIGNAL
NO AES1
NO AES2
NO LTC IN
NO AES6
NO AES7
ALARM REPORT
ALARM REPORT
ALARM REPORT
ALARM LEVEL
NO AES3 ALARM LEVEL
ALARM LEVEL
[ GREEN, YELLOW, RED, FLASH RED ]
[ NONE, GPI ]
[ NONE, GPI ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ NONE, GPI ]
[ GREEN, YELLOW, RED, FLASH RED ]
[ NONE, GPI ]
[ GREEN, YELLOW, RED, FLASH RED ]
ALARM REPORT
TEST MODE ALARM LEVEL
ALARM REPORT
AMX-1881:XXX
NO AFD PRESENCE
NO VLI PRESENCE
ALARM REPORT
ALARM LEVEL
VERSION
[ GREEN, YELLOW, RED, FLASH RED ]
[ NONE, GPI ]
[ NONE, GPI ]
ALARM REPORT [ NONE, GPI ]
ALARM LEVEL [ GREEN, YELLOW, RED, FLASH RED ]
[ GREEN, YELLOW, RED, FLASH RED ]
● ●
●
●
● ●
●
●
●
● ●
●
●