Grass Valley AMX-1842 User Manual
Page 10
AMX-1842 HD/SD 4 AES Embedder
Guide to Installation and Operation
Page 10 of 10
AMX-1842
Electromagnetic Compatibility
This equipment has been tested for verification of compliance with FCC Part 15, Subpart B requirements for Class A
digital devices.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this equipment in a residential
area is likely to cause harmful interference in which case the user will be required to correct the interference at
his own expense.
This equipment has been tested and found to comply with the requirements of the EMC directive 2004/108/CE:
•
2004/108/EC
Electromagnetic Compatibility (EMC) Directive
•
EN 55022
Conducted emissions, Class A
•
EN 55022
Radiated emissions, Class A
•
EN 61000-3-2
Harmonic current emission limits
•
EN 61000-3-3 Voltage fluctuation and flicker limitations
•
EN 61000-4-2 Electrostatic discharge immunity
•
EN 61000-4-3 Radiated electromagnetic field immunity – RF
•
EN 61000-4-4 EFT immunity
•
EN 61000-4-5 Surge immunity
•
EN 61000-4-6 Conducted immunity
•
EN 61000-4-11 Voltage dips, short interruption and voltage variation immunity
CONTACT MIRANDA
For technical assistance, please contact the Miranda Technical support centre nearest you:
Americas
Telephone:
+1-800-224-7882
e-mail:
[email protected]
Asia
Telephone:
+852-2539-6987
e-mail:
[email protected]
Europe, Middle East, Africa, UK
Telephone:
+44 (0) 1491 820222
e-mail:
China
Telephone:
+86-10-5873-1814
e-mail:
[email protected]
France (only)
Telephone:
+33 (0) 1 55 86 87 88
e-mail:
Visit our web sit