Grass Valley ADVC G3 - Manual (Page 17)

5
4 Hardware Settings
4.1 DIP switches
SW1
SW2
SW3
Specifies the 3D Structure, or specifies whether the
signal is output as redundant.
SW1=OFF
SW2=OFF
SW3=OFF Redundant
SW1=ON
SW2=OFF
SW3=OFF Top-and-Bottom
SW1=OFF
SW2=ON
SW3=OFF Side-by-Side(half)
SW1=ON
SW2=ON
SW3=OFF Frame Packing
SW1=OFF
SW2=OFF
SW3=ON Checker Board
*Currently not available
SW4 Reserved
SW5 Reserved
SW6 Enables/Disables 3D output mode.
* Available only for Top-and-bottom and Side-by-Side.
SW7 Enables/Disables Widescreen mode.
OFF: 4:3
ON: 16:9
* Available only for SD input mode.
SW8 Specifies if SD signal is converted to Progressive signal.
OFF: Interlace
ON: Progressive
* Available only for SD input mode.