Grass Valley ADVC G2 - Manual (Page 18)

6
4 Hardware Settings
4.1 DIP switches
SW1 Specifies the reference signal.
OFF : REF
ON : Input(SDI)
Internal(HDMI)
SW2 Specifies the video channel for input.
OFF : SDI
ON : HDMI
SW3 Specifies the 3G-SDI output mode.
OFF : Level A:Direct image format mapping
ON : Level B:2x SMPTE292 HD mapping
SW4 Specifies the analog video output.
OFF : Composite + S-Video
ON : Component
* Always outputs Component unless when outputting SD signal.
SW5 Specifies the analog video output pedestal.
OFF : 0 IRE
ON : 7.5 IRE
* Takes effect only in SD output mode.
SW6 Specifies the analog component video level.
OFF : SMPTE/EBU N10
ON : Betacam Level
* Takes effect only for component SD resolution.
SW7
SW8
Specifies the demux analog audio channel.
SW7=OFF, SW8=OFF : channel 1/2
SW7=ON, SW8=OFF : channel 3/4
SW7=OFF, SW8=ON : channel 5/6
SW7=ON, SW8=ON : channel 7/8
SW9 Specifies the analog audio output level.
OFF : +0dBu
ON : +4dBu
SW10 Reserved
SW11 Reserved
SW12 Reserved