Grass Valley Safety Summary - Manual (Page 17)

Safety specifications for products
Refer to the safety information in this section as appropriate for your product.
Dyno S Controller general specifications
Specification Characteristic
100 - 240 VAC, 50 - 60 Hz, and 2.5A Power
Dimensions: length = 15.1 in. (383 mm); width = 10.0 in. (254
mm); height = 6.4 in.(64 mm) (All approx.) Dimensions
4.75 kg (10.5 lbs.) Weight
Operating: 0°C to 40°C (32°F to 104°F); Storage: -20°C to
60°C (-4°F to 140°F) Temperature range
10% to 90% (relative humidity) Humidity range
1.1A 20V Self Resetting - This fuse is mounted on the CPU
Carrier board, on the 12V rail, and is intended to prevent over
current to the LCD Panel. While this fuse is installed, it is not
used with the currently approved LCD panel on the K2 Dyno
S. Fuse (internal)
21 January 2013 Safety Summary 17