Grass Valley LDK 5302 - Manual (Page 15)

LDK 5302/60 2-inch HD viewfinder User’s Guide (v3.0) 15
Chapter 2 - Operation
Chapter 2
Operation
2.1 Controls
Set up the viewfinder according to your own preferences; adjust viewing
parameters, select markers, message boxes and on-screen display times in the VF
menu.
2.1.1 Tally on/off switch
The red Tally indicators at the front of the viewfinder and at the rear of the handgrip
light to indicate that the camera is On Air. The Tally switch is used to control the Tally
indicators at the front of the viewfinder and the rear of the handgrip. When this
switch is set to the Off position, the Tally indicator does not light even when the
camera is On Air.
When the camera is On Air, the REC indicator in the viewfinder lights. When the
studio ISO signal is received, the MEDIA indicator lights.
Crisp
Tally Zebra Option
Contr. Bright.
Tally on/off
switch
Zebra on/off
switch
VF option
switch
Crispening
control
Contrast
control
Brightness
control
Dioptre
adjustment ring