Eneo VMC-5.6/2S-LCD - Manual (Page 10)

0
4. Installation and Operation
Front view
Side view
1 Display Remove protection foil after installation.
2 MODE Selection of settings: CONTRAST, BRIGHTNESS, HUE, COLOR, SHARPNESS and VOLUME
3 Change of settings. Values can be increased or decreased, 0 ~ 00.
Selection of
AV1 or AV2
4 POWER ON/OFF switch
5 LED Turns green if the monitor is switched on.
Turns red if no input receives a signal. (Power save mode)
6 OFF/ON ON/OFF switch
7 DC IN Power supply VDC / 500mA
8+9 AV, AV The jack 8 (AV) and 9 (AV) are audio and video inputs.
Two cables with cinch connectors (white = audio, yellow = video) are supplied.
10 Speaker At the rear side of the monitor.
3 5 4
1
2 3
6 7 8 9 6 7 8 9