Eneo VMC-32LEDM - Manual (Page 20)

20
Installation and User's Guide
TRIGGER MODE : Set the trigger mode to OFF/FULL/
PIP/DW1/DW2
TRIGGER DWELL : Set the transition time from trigger
mode to normal mode
TRIGGER INPUT : Select the input source of trigger mode
TRIGGER MODE TRIGGER INPUT
Inputs can be set to VIDEO1, VIDEO2 and S-VIDEO mode
TRIGGER
Press the MENU/EXIT key to access menu. 1.
Use the & arrow to highlight a selection. 2.
Press the /SELECT to choose an item. 3.
4. Use the & arrow to highlight a selection.
5. Use the & arrow to adjust the setting on a
selected item.
Default setting is OFF and switch to ON trigger mode
TRIGGER DWELL
Default setting is 10s and adjustable from range of 10 to 60s
TRIGGER
TRIGGER MODE
TRIGGER INPUT
TRIGGER DWELL
PICTURE
SCREEN
SETUP
RGB
SETUP
SETUP
CYCLE
TRIGGER
◀ OFF ▶
◀ VIDEO1 ▶
▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*
10s
TRIGGER
TRIGGER MODE
TRIGGER INPUT
TRIGGER DWELL
PICTURE
SCREEN
SETUP
RGB
SETUP
SETUP
CYCLE
TRIGGER
◀ OFF ▶
◀ VIDEO1 ▶
▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*
10s
TRIGGER
TRIGGER MODE
TRIGGER INPUT
TRIGGER DWELL
PICTURE
SCREEN
SETUP
RGB
SETUP
SETUP
CYCLE
TRIGGER
◀ OFF ▶
◀ VIDEO1 ▶
▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*
10s
TRIGGER
TRIGGER MODE
TRIGGER INPUT
TRIGGER DWELL
PICTURE
SCREEN
SETUP
RGB
SETUP
SETUP
CYCLE
TRIGGER
◀ OFF ▶
◀ VIDEO1 ▶
▼/▲ : MOVE ◀/▶ : ADJUST ▶ : ENTER MENU : EXIT VER : *.*
10s
Notice :
After setting the trigger mode, if the trigger terminal is not
closed(short input), the screen moves to Trigger modes.
Please set the trigger mode after connecting the trigger
signal to the close position.