Eneo HDA-3000E - Manual (Page 4)

4
• EX-SDI ► HD-SDI as a Converter
• EX-SDI ► EX-SDI as an Extender
• HD-SDI ► HD-SDI as an Extender
• Auto HD-SDI/EX-SDI Input Detection
• External DIP Switch Configuration
• Built-in Test Video Pattern for self-diagnosis :
• EX-SDI ► Blue Pattern on a screen
• HD-SDI ► Orange Pattern on a screen
Composition
• HD Extender
• Installation Guide
• Mounting Screw (3.5x25mm) x2
i
Notice:
1. Application as Extender: The transmis-
sion distance is not guaranteed due to
limited performance.
2. Multiple BNC cable and connector
extension is not recommended. It
may cause the loss of signal and could
extremely reduce the transmission
distance.
Connections
Make sure the power is removed before the installation.
1. Plug in a BNC cable to BNC INPUT/OUTPUT connector.(INPUT: Cable from Camera
side, OUTPUT: Cable toward DVR or another extender)
2. Route the power cable and connect to Power connector.
3. Set the DIP Switch according to installation concept. (Refer to Switch Description).
4. Make sure the Video is displayed on Monitor.