11 privacy zone – Eneo EDMC-3221B User Manual
Page 30

25
TITLE
: up to 12 characters.
SWAP
: Swap the start point for the end point.
1. Select “NUMBER” and set the desired number by pushing the Joystick to the left or right.
2. To edit the “TITLE”, follow the procedure of the Auto Scan above to edit titles.
3. Select “START ANGLE”. Hold down the CTRL key while selecting the start position using the
Joystick. Current panning position will be displayed. Release the CTRL key to complete the
selection of the start position. Or press the IRIS Open key then the “CTRL” displays. Move the
desired position. Press the IRIS Close key then the “CTRL” disappears. To adjust at the 0.1
degree interval, twist the Joystick at the pan field and the tilt field.
4. Select “END ANGLE”. Hold down the CTRL key while moving the Joystick to select the end
position. Release the CTRL key to complete the selection of the end position. Or press the
IRIS Open key then the “CTRL” displays. Move the desired position. Press the IRIS Close key
then the “CTRL” disappears. To adjust at the 0.1 degree interval, twist the Joystick at the pan
field and the tilt field.
5. Select “SWAP”. Set to ON to exchange the start angle and the end angle.
6. Select “SAVE AND EXIT” and push the Joystick to the right or press the IRIS Open key.
Press
the ESC or IRIS Close key to exit the program without saving.
3.11 Privacy Zone
Hide up to 8 unwanted scenes in a camera.
PRIVACY ZONE SETUP
(CTRL KEY)
NO TITLE METHOD
01 ABC ON BLOCK
02 DEF ON V.OFF
03 OFF ----
04 OFF ----
05 OFF ----
06 OFF ----
07 OFF ----
08 OFF ----
SAVE AND EXIT(ESC TO CANCEL)
1. Place the cursor at the title field.
2. Hold down the CTRL key displays the privacy area menu while selecting the position using the
Joystick. Current position will be displayed. Release the CTRL key to complete the selection
of the position.
Or press the IRIS Open key then the privacy area menu displays. Move the desired position.
Press the IRIS Close key then the “CTRL” disappears and returns to the previous menu.
PRIVACY AREA MENU
(CTRL KEY)
CONTROL
NUMBER 001
354.8 344.8