Eneo HDC-2080CS D - Manual (Page 18)

18
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the side of cam-
era unit. Five commands are available with the joy stick.
Description of the joystick operation
1. SET Key ( ●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down for about 1.5sec
2. UP/DOWN Key ( ▲/▼) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key ( ◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. ‘ ☟’ denotes the long press down straightly for about 2 seconds
Description of the ZOOM&FOCUS adjustment
i Works only when OSD Menu is inactive.
1. ▲ : Zoom In
2. ▼ : Zoom Out
OSD menu startup
Press ‘ ●’ (OSD menu Joy stick key) down for about 2 seconds to access the setup menu
mode.
Lens Initializing is strongly recommended at the first stage of setup menu control. ZOOM/
FOCUS > LENS INIT > Press the joystick ‘ ☟’ straight down for about 2 seconds.