Eneo PXB-2080MIR D - Manual (Page 28)

28
Operating instructions
Using OSD controller
Setup menu can be accessed and controlled by OSD control joy stick on the side of cam-
era unit. Five commands are available with the joy stick.
Description of the joystick operation
1. SET Key ( ●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down for about 1.5sec
2. UP/DOWN Key ( ▲/▼) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key ( ◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
Description of the D-ZOOM adjustment
i Works only when OSD Menu is inactive and IP is not connected. Set to pointing zoom
ON for D-Zoom control.
1. ▲ : Zoom In
Video Sub-out Connector
Cover Open
Standard SD Card Slot
OSD Control Joy Stick
IP Reset