Atlantic Water Gardens SOLCC2 - Manual (Page 7)

7
Problem Possible Cause Possible Solution
Remote is not working
(no indicator light) No batteries / batteries
dead
Put in new batteries.
Remote is not working
(indicator light is on) Remote is not synced with
Control Module Refer to synchronizing the
remote instructions on page 5.
LED light will
not illuminate
No power to outlet Confirm power to outlet.
No Power to LED
Check all connections, ensure
cord is not cut or damaged.
LED is broken / defective Replace LED bulb
LED color differs
from remote control
Improper connection
between LED light and
control module
Inspect connection / align
arrow on plugs
Controller failure
Contact Dealer for repair /
replacement
Multiple lights display
different colors when
connected to the
same splitter
Improper connection
between LED light and
3-way splitter
Inspect connection / align
arrow on plugs
Controller failure
Contact Dealer for repair /
replacement
Troubleshooting Guide
Always turn off power before inspecting the Color Changing Fountains. Failure to
observe this precaution can result in a serious accident.
Before ordering repairs, carefully read through this instruction booklet. If the
problem persists, contact your dealer.