ATL Telecom R1-SW Ethernet Switch - Manual (Page 208)

R1-SW24L2B User’s Manual
9-40
QoS Configuration Commands
The following table lists the commands for configuring QoS on the Corecess R1-SW24L2B:
Table 9-16 QoS configuration commands
Command Function
8021p enable
Enables QoS based on IEEE 802.1p CoS (Class of Service) on the Corecess
R1-SW24L2B.
8021p user-priority
Assigns the priority for 802.1p class of service to a port or a VLAN
bandwidth
Specifies the minimum bandwidth of a traffic class.
class
Enters Policy-map class configuration mode to specify a previously created
class map to be included in the policy map.
class-map
Enters the class-map configuration mode to configure class maps.
dhcp-offer filter
discard
Filters the DHCP server packets received from the specified port.
filter
Configures filtering a class of traffic which belongings to a policy map.
mark
Configures the remarking feature which modifies the CoS, IP precedence, or
DSCP field of a traffic class.
match cos
Specifies the CoS as a match criterion of a class map.
match dscp
Specifies the DSCP as a match criterion of a class map.
match ip-da
Specifies the destination IP address as a match criterion of a class map.
match ip-prec
Specifies the IP precedence as a match criterion of a class map.
match ip-sa
Specifies the source IP address as a match criterion of a class map.
match mac-da
Specifies the destination MAC address as a match criterion of a class map.
match mac-sa
Specifies the source MAC address as a match criterion of a class map.
match tcp-dpn
Identifies destination TCP port numbers as match criteria.
match tcp-flag
Specifies the TCP flag as a match criterion of a class map.
match tcp-spn
Identifies source TCP port numbers as match criteria.
match tos
Specifies the ToS as a match criterion of a class map.
match udp-dpn
Identifies destination UDP port numbers as match criteria.
match udp-spn
Identifies source UDP port numbers as match criteria.
netbios filter
discard
Filters the NetBIOS packets received from the specified port.