Peration, Alarms – ARAG Alfa 310S User Manual
Page 3
via Palladio, 5/A - 42048 RUBIERA (RE) - Italy - tel. + 39 0522 622011 - Fax +39 0522 628944 - www.aragnet.com Cod. D20250_GB-m01
O
PERATION
ALARMS
Seed sensor XX! No signal
- Alfa 310S is not receiving the signal from seed sensor on line XX
Shaft sensor XX! No signal
- Alfa 310S is not receiving the signal from shaft Rev. sensor XX
Speed sensor! No signal
- Alfa 310S is not receiving the signal from speed sensor
Rev. sensor X! No signal
- Alfa 310S is not receiving the signal from rev. sensor X
seeding exceeding max. limit
- Number of seeds per metre exceeds maximum set value
seeding below min. limit
- Number of seeds per metre is below minimum set value
Row XX: seeding exceeding max. limit
- Number of seeds per metre on seed row XX exceeds maximum set value
Row XX: seeding below min. limit
- Number of seeds per metre on seed row XX is below minimum set value
Row XX: Seeding tube clogged
- Seeding tube is clogged or seed sensor for row XX has low efficiency
Row XX: no seeding
- Seeds are not detected on row XX
Impeller X! Speed too high
- Impeller X speed exceeds maximum set value
Impeller X! Speed too low
- Impeller X speed is below minimum set value
SD card not available
- Memory card is not inserted
SD card writing locked out
- Memory card writing locked out
Impossible to save the file
- No space available or damaged memory card
Slow down! Maximum speed reached
- Vehicle speed exceeds maximum set value
Row XX: no fertiliz. (A)
- Fertilizer A is not detected on row XX
Row XX: no fertiliz. (B)
- Fertilizer B is not detected on row XX
Row XX: Fertilizer tube clogged (B)
- Seeding tube is clogged or fertilizer sensor B for row XX has low efficiency
Shaft XX: No rotation
- No rotation of shaft XX is detected
- Seeding tube is clogged or fertilizer sensor A for row XX has low efficiency
Row XX: Fertilizer tube clogged (A)
Rev. sensor 1 ! No rotation
Position sensor! No signal
- Alfa 310S is not receiving the signal from seed state sensor