Exmark Quest Bagger 4500-438 rev. a - Manual (Page 16)

Maintenance
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
WARNING
While maintenance or adjustments are being
made, someone could start the engine.
Accidental starting of the engine could
seriously injure you or other bystanders.
Remove the key from the ignition switch,
engage parking brake, and pull the wire(s)
off the spark plug(s) before you do any
maintenance. Also push the wire(s) aside
so it does not accidentally contact the spark
plug(s).
WARNING
Debris built up in the engine compartment,
if not removed, could be ignited by a hot
engine. A fire in the engine compartment
can burn you and others and can damage
property.
• Before using and while the engine is
cool, check for debris in the engine
compartment.
• Keep the machine free of grass, leaves, or
other debris build-up.
• Clean up oil or fuel spillage and fuel
soaked debris.
• Allow the machine to cool before storing.
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 10 hours • Check the bagger attachment.
Before each use or daily • Clean the bagger attachment.
Monthly • Check the bagger attachment.
Yearly or before storage • Clean the bagger attachment.
Periodic Maintenance
Inspecting the Bagger
Attachment
Service Interval: After the first 10 hours
Monthly thereafter.
1. Check the chute, discharge tube, and the bagger
top. Replace these parts if they are cracked or
broken.
2. Tighten all nuts, bolts, and screws.
3. Under normal use the bags will deteriorate and
wear. Inspect the grass bags for deterioration.
WARNING
You or bystanders could be severely injured
by flying debris or thrown objects that may
pass through torn, worn or deteriorated grass
bags.
• Frequently check the grass bags for holes,
rips, wear, and other deterioration.
• Do not wash the grass bags.
• If the bag has deteriorated, install new
grass bags supplied by the manufacturer
of this bagger attachment.
16