Epson DLR3-16N/410CDV - Manual (Page 54)

54 DLR-16N/XX
Event – Event Status
The “Event Status” menu indicates the status of all possible events:
Grey text: Event detection not enabled
White text: Event detection enabled
Flashing border: Message – acute event for 5 sec
Yellow field: Pending event
Setup Menu... Event Event Status Event Status
Term Event
Alarm-In At alarm input 1 to 16
Check Alarm-In Error detected at one of alarm inputs 1 to 16
Motion Motion detected on camera 1 to 16
Video Loss Video loss on camera 1 to 16
Text-In Text input on text input device 1 to 16
Panic Record Panic recording
Check Recording On checking the recording
Disk Almost Full
On checking the data medium (only if DVR is not operating in Overwrite
mode)
Disk Full
On checking the data medium (only if DVR is not operating in Overwrite
mode)
Setup Menu... Event Event Status Storage
Term Meaning
Type Memory type
Disk Bad Data carrier status
Temperature Data carrier status
S.M.A.R.T. Result of S.M.A.R.T. check
●
●
●
●
Setup menu, continued