Aqua Lung Black Diamond SL BC - Manual (Page 7)

6 Black Diamond Owner’s Manual Black Diamond Owner’s Manual 7
Threading the Cylinder Band
Step 1. Firmly grasp the metal D-ring
with your left hand.
Step 2. While firmly holding the metal
D-ring, rotate the buckle back towards
the webbing. The buckle should form
and angle with the metal D-ring as
shown in the top view.
Step 3. Insert band through
the metal D-ring, then
through the middle slot.
Step 4. Insert band through the
inside slot.
Step 5. Insert band through
the outer slot.
NOTE: This final threading step is done when the BC is secured to the
cylinder (refer to step 3, figure 6 on previous page). Close the buckle
halfway to prevent the webbing from slipping and thread the free end of
the band through the open slot in the end of the buckle.
F
TOP VIEW