Aqua Leisure Standard Characters - Manual (Page 3)

USER SERVICING INSTRUCTIONS
Replace the bulb
1. Unplug power cord from receptacle. Grasp the plug and remove from receptacle or other outlet
device. Do not unplug by pulling on cord.
2. To replace the bulb, unzip opening at bottom of character. Reach into character to locate the
light cord and bulb assembly.
3. To remove bulb from the lamp shade holder, carefully unsnap lamp shade. Remove light bulb by
turning counter clockwise until completely free of lampholder.
4. Replace light bulb with new type C-7 Candelabra type bulb. do not over tighten as this may
damage light bulb or lamp holder.
5. Risk of fire. Replace the lamp shade after new light bulb is installed. Snap the 2 shade halves
together, trapping the lamp holder and bulb inside. If done correctly, lamp shade should not pull
off of light cord.
CAUTION:
Replace only with same type C-7 Watt Max 7
Candelabra UL Classified lamps
Replace the fuse.
1. This product is equipped with a fuse in the plug of the unit.
2. Grasp plug and remove from receptacle or other outlet
device. Do not unplug by pulling on cord.
3. Open fuse cover. Slide open fuse access cover on top of
attachment plug towards blades.
4. Remove fuse carefully.
5. Risk of fire. Replace fuse with 5 Amp, 125 Volt fuse
(provided with product).
6. Close fuse cover. Slide closed the fuse access cover on top
of attachment plug.
7. Risk of fire. Do not replace attachment plug. Contains a
safety device (fuse) that should not be removed.Discard product if the attachment plug is
damaged.
8. Remove old fuse and replace. Close the compartment cover securely.
TROUBLE SHOOTING CHECKLIST
If your Holiday Inflatable is not inflating, please check the following:
• The power source is interrupted or the cord may be unplugged.
• Blower airflow may be obstructed – Never attempt to disassemble blower unit.
• It may be too cold for the blower unit to operate.
• Fuse may be blown – please refer to “Replace the Fuse” Instructions within this manual for
proper replacement procedure.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
E.3