Amer Networks SGR24 - Manual (Page 15)

9
AC Power Connector This is a three-pronged connector that
supports the power cord. Plug in the female connector of the provided
power cord into this connector, and the male into a power outlet.
Supported input voltages range from 100 ~ 240 VAC at 50 ~ 60 Hz.
LED Indicators
The LED indicators of the Switch include Power, Link/Act,
1000Mbps and 100Mbps. The following shows the LED indicators for
the Switch along with an explanation of each indicator.
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
10/100/1000Mbps Gigabit Ethernet Switch
The Switch LED indicators
Per unit:
Power This indicator lights green when the Switch is receiving power,
otherwise, it is off.
Per port:
Link/ACT. This indicator lights green when the port is connected to
a Gigabit Ethernet, Fast Ethernet or Ethernet station. If the indicator
blinks green, it is transmitting or receiving data.
1000Mbps. This LED indicator lights green when the port is
connected to a 1000Mbps Gigabit Ethernet station.
100Mbps. This LED indicator lights green when the port is
connected to a 100Mbps Fast Ethernet station.