Allmand Brothers TLB6235 Tractor - Manual (Page 20)

20
*Horsepower ratings are established in accordance with Society of Automotive Engineers -
Small Engine Test Code - J1349 GROSS.
HYDROSTATIC TRANSMISSION: EATON – MODEL 72400
Displacement 3.0 in3/r (49.2 cm3/r)
Flow @ rated speed and pressure 38.9 GPM (146.2 L/min.)
Speed, Input 3000 RPM (Max.)
Operating pressure (Max.) 3000 PSI (207 Bar) - Cont.
5000 PSI (345 Bar) - Inter.
Operating temperature 190 deg.F(87.deg.C)(Max.)
.
ENGINE - ISUZU - DIESEL
Model 3CD1
Type Vertical, water cooled, 4-cycle diesel engine
Bore 3.3" (83 mm)
Stroke 3.54" (91 mm)
Displacement 91.3 cu. in. (1.5L)
Power @ 3000 RPM 32.7 HP*
Maximum torque @ 1800 RPM 66.9 ft-lbs (90.7 Nm)
Compression ratio 19:1
Weight 341lbs (155 kg)
Oil capacity 7.14 qts (6.7 L)
Lubrication Forced lubrication by pump with full flow paper filter
Coolant capacity 2.13 Qts (2.0 L)
Cooling system Pressurized radiator, forced circulation with water pump
FUEL REQUIREMENTS
Your ISUZU engine is designed to use either Number 1-D or Number 2-D diesel fuel.
However, for better fuel economy, use Number 2-D diesel fuel whenever possible.
At temperatures less than -7 deg C, (20 deg F), when Number 2-D may pose operating
problems at colder temperatures, use Number 1-D fuel (if available) or use a “winterized”
Number 2-D (a blend of Number 1-D and Number 2-D). Check with the service station
operator to be sure you get the properly blended fuel. For more details on fuel see pages
16 through 19 in your Isuzu instruction manual.
AXIAL PISTON MOTOR
Motor series 74624
Motor displacement 3.0cm 3 /rev.
ENGINE OIL REQUIREMENTS
Use a high quality engine oil of API (American Petroleum Institute) service class CC/CD.
Refer to pages 21-22 in your Isuzu instruction Manual for more detailed engine oil require-
ments.
HYDRAULIC OIL REQUIREMENTS
Use a high quality multipurpose fluid with an SAE 20W/ISO 68 rating.
NOTE: The TLB 6235 has been factory filled with HYDROCLEAR 9836.