Maxi-lite series, Manual winch tower cable routing – Allmand Brothers ML6-8 LD User Manual
Page 9
* Use these codes to designate color needed:
01-White
06-Allmand Gold
02-Gloss Black
09-Flat Black
03-Gray
10-High temp Black
04-Allmand Yellow
11-Red
05-Orange
MAXI-LITE SERIES
B-2B
NO REQ’D PART NO DESCRIPTION
MANUAL WINCH TOWER CABLE ROUTING
INSTRUCTIONS FOR REPLACING STEEL CABLES.
3/16 X 11'
REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 3" MAST SECTION.
REMOVE THE WIRE ROPE CLIPS AT TOP END OF THE 4" MAST SECTION.
REMOVE THE 3" PULLEY AT THE END OF THE 3" MAST SECTION.
REMOVE THE 2 5/8" ROUND MAST SECTION.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE ROUND MAST SECTION.
REPLACE 2 5/8" ROUND MAST SECTION IN THE 3" MAST SECTION.
ROUTE CABLE THROUGH PULLEY BRACKETS AND INSTALL 3" PULLEY.
WITH ALL SECTIONS PUSHED TOGETHER TIGHT, INSERT CABLE THROUGH HALF-LINK
AND REINSTALL WIRE ROPE CLIPS.
REINSTALL CUSHION CLAMPS AND MAST WIRING ON THE 3" MAST SECTION.
3/16 X 17' 9"
REMOVE MAST WIRING FROM BALLAST COMPARTMENT (SEE ELECTRICAL SCHEMATIC)
REMOVE THE CUSHION CLAMPS AND MAST WIRING FROM 4" MAST SECTION.
REMOVE STOP BOLT AND WASHER.
REMOVE 4 TOWER PADS AND 3" PULLEY AT THE END OF THE 4" MAST SECTION.
REMOVE THE 2 5/8" ROUND AND 3" MAST SECTIONS TOGETHER.
REMOVE ALL BROKEN AND FRAYED CABLE.
REPLACE NEW CABLE THROUGH SLOT AND EYELET IN THE 3" MAST SECTION AND
THROUGH PULLEY BRACKETS.
REPLACE 2 5/8" ROUND AND 3" MAST SECTIONS.
REPLACE 3" PULLEY AND 4 TOWER PADS.
ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.
REPLACE STOP BOLT AND WASHER.
REPLACE CUSHION CLAMPS AND MAST WIRING ON 4" MAST SECTION.
REPLACE MAST WIRING IN BALLAST COMPARTMENT. (SEE ELECTRICAL SCHEMATIC)
3/16 X 10’
REMOVE ALL BROKEN AND FRAYED CABLE.
FEED NEW CABLE THROUGH EYELET IN MAST PIVOT SECTION.
FEED THROUGH PULLEY BRACKETS AND AROUND PULLEY IN FRONT UPRIGHTS.
ATTACH CABLE TO WINCH AND WIND IN CLOCKWISE DIRECTION UNTIL ALL SLACK IS OUT.
1
2
620084
WIRE ROPE CLIP 3/16"
2
1
045040
WIRE ROPE THIMBLE, ¼”
3
1
620076
STEEL CABLE 3/16- X 11'
4
1
650140
MAST WIRING - 14/7 X 324" (STRAIGHT CORD)
5
1
650133
STEEL CABLE 3/16” X 17' 9"
6
1
320185
STEEL CABLE 3/16" X 10’
7
1
352016
MAST WIRING 16/8 X 344” (CORD REEL 4 LIGHT)
1
352083
MAST WIRING 16/10 X 344” (CORD REEL 6 LIGHT)
680209*
MANUAL WINCH TOWER (4 Light) Complete W/Light Bar Assy
680210*
MANUAL CORD REEL TOWER (4 Light) Complete W/Light Bar Assy
680213*
MANUAL WINCH TOWER (6 Light) Complete W/Light Bar Assy
680214*
MANUAL CORD REEL TOWER (6 Light) Complete W/Light Bar Assy